 |
 |
 |
|
The PW5001C features a water hose located on the bottom of the slim design barrel (3-1/8'') for added control and comfort. With three holes at the spindle, water is spread evenly to the pad and prevents the pad from clogging. The water flow is easily controlled with the conveniently located solid brass ball valve and is equipped with a common fitting to accept the most popular water hose connections.
An advantage of the PW5001C is its variable speed with a pre-setting dial (2,000 - 4,000 RPM) for optimum working speed. Another professional feature is soft-start technology for controlled start-up and electronic speed control to maintain constant speed under load. This new wet stone polisher is equipped with a ground fault circuit interrupter (GFCI) plug for safety, an overload switch to protect armature failure, and a housing cover to protect the industrial die cast aluminum gear housing. |
|
|
|
|
|
 |
|
 |
|
Features
- Powerful 7.9 AMP motor and lightweight (4.6 lbs.)
- High power-to-weight ratio (1.72) for reduced operator fatigue
- Soft-Start feature for smooth start-up; variable speed
- Housing cover protects the industrial die cast aluminum gear housing
- 3 holes at the spindle top evenly spread water to the pad and prevents the pad from clogging
- Overload switch to protect armature failure
- Includes a ground fault circuit interrupter (GFCI) plug
- Pre-setting dial (2,000 – 4,000 RPM) for optimum rotating speed
|
|
|
 |
|
 |
|
|
|
