 |
 |
 |
 |
90-Degree Seam Solution
PRODUCT HIGHLIGHTS
- Consistently create high-quality, expertly aligned perpendicular seams
- Ideal for waterfall edges, mitered aprons, butt-joints, compound corners, and inside corners
- Proprietary, non-marking vacuum cups won’t stain surfaces
- FTS™ vacuum cup technology for optimum hold on textured and leathered materials
- Knurled rollers and fine-tune levelers help align and dial-in precise angles
- Counter-pressure leveler overcomes lower outswing of vertical pieces
- Includes Anchor Cup Attachments to accommodate waterfall edges or other large pieces
- Powerful, compact pump maintains max pressure for entire system
- Runs on AC power or AA batteries for any situation
PRODUCT DESCRIPTION
The ALL-NEW Stealth Seamer 90° Auto is the most versatile tool on the
market for creating high-quality perpendicular seams without the hassle
of straps or bar-clamps. The 90° Auto is the ideal solution for
waterfall edges, mitered aprons, butt-joints, and compound corners. It
is the only 90° seamer that can also be inverted for inside corners. The
product’s proprietary non-marking cups feature our FTS™ (Flexible
Triple Seal) technology that locks-in vacuum and provides optimum
hold—even on textured and leathered materials.
Smooth-turning knurled rollers pull pieces together for expert
alignment, and fine-tune levelers help dial-in the perfect angle for
precise seams. An integrated counter-pressure leveler helps overcome the
lower out-swing of vertical pieces. For larger pieces such as waterfall
designs, use the Anchor Cup Attachments for additional support
(included with every 90° Auto system). The Anchor Cup Attachments can
also be used independently as a non-marking carrying device.
A powerful, compact vacuum pump maintains maximum pressure for all
cups in the Auto system, so you can set the seam and walk away with
confidence. The high-capacity pump runs on AC power or AA batteries for
any install situation. Sold in pairs with a convenient storage case;
recommended for porous and non-porous materials.
Part # | 5145-90A-17 | Includes | Two 90° seam setter units with 5" gray cups, two Anchor Cup Attachments,
eight cup covers, vacuum pump, international AC power adapter, AA
battery holder, battery power adapter, storage case | Product Dimensions | 30" x 14" x 13" (all components in case) | Product Weight | 26.1 lb (all components in case) | Package Dimensions | 30" x 15" x 15" | Shipping Weight
| 30.0 lb | Materials | Anodized aluminum, aluminum, reinforced polymer, stainless steel, silicone, zinc plated steel, polyurethane air tubes |
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features
- Pressure-maintaining system... get it set, and walk away
- Achieve high-quality, even seams
- Leveling feet allow “fine-tune” adjustment on both sides of the seam
- Eight leveling points provide total control along the entire seam to eliminate the unevenness caused by crowned countertops
- Strong 8” vacuum cups for increased holding power on the heaviest of tops
- Non-spinning, leveling feet with vinyl caps prevent scratching of surfaces
- Entire
seam work area easily accessible during use of product (removal is not
needed in order to apply epoxy or scrape the seam)
- If desired,
units can be converted on the spot to manual seam setters (no
electricity required) via insertion of vacuum cup thumb pump plungers
back into vacuum cups (plungers provided)
- Two tools in one: seam joiner and seam leveler
- Seams easily open and close by use of smooth-turning knurled roller
- Large 8” thumb-pumped vacuum cups with quick vacuum-release buttons
- Four leveling feet that are “non-spinning” and contain replaceable vinyl caps to prevent scratching of surfaces
- High quality, machined aluminum tightening handles
- Protective plastic vacuum cup covers
- Long-lasting anodized billet aluminum and stainless steel components
|
|
 |
 |
 |
 |
|
 |

|