 |
 |
 |
 |
90-Degree Seam Solution
PRODUCT HIGHLIGHTS
- Consistently create high-quality, expertly aligned perpendicular seams
- Ideal for mitered aprons, butt-joints, compound corners, and inside corners
- Proprietary, non-marking vacuum cups won’t stain surfaces
- FTS™ vacuum cup technology for optimum hold on textured and leathered materials
- Knurled rollers and fine-tune levelers align and dial-in precise angles
- Counter-pressure leveler overcomes lower outswing of vertical pieces
- Easy to read indicators to monitor vacuum pressure at a glance
- Cups can be re-pumped without loss of remaining pressure
PRODUCT DESCRIPTION
The ALL-NEW Stealth Seamer 90° Manual is the ideal solution for
consistently creating high-quality perpendicular seams such as mitered
aprons, butt-joints, and compound corners—without the hassle of straps
or bar-clamps. It is the only 90° seamer that can also be inverted for
inside corners. The product’s proprietary non-marking cups feature our
FTS™ (Flexible Triple Seal) technology that locks-in vacuum and provides
optimum hold—even on textured and leathered materials. Smooth-turning
knurled rollers pull pieces together for expert alignment, and fine-tune
levelers help dial-in the perfect angle for precise seams. An
integrated counter-pressure leveler helps overcome the lower out-swing
of vertical pieces. Easy to read indicators allow monitoring vacuum
pressure at a glance, and cups can be re-pumped without loss of
remaining pressure, unlike screw-knob or flip-lever suction cups. Sold
individually; not recommended for porous material or heavy waterfall
pieces (see 90° Auto for these applications).
Part # | 5145-90M-17 | Includes
| One 90° seam setter unit with 5" gray cups, two cup covers | Product Dimensions | 18" x 10" x 4" | Product Weight |
5.5 lb | Package Dimensions | 20" x 10" x 4" | Shipping Weight |
6.5 lb | Materials | Anodized aluminum, aluminum, reinforced polymer, silicone, stainless steel, zinc plated steel |
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features
- Pressure-maintaining system... get it set, and walk away
- Achieve high-quality, even seams
- Leveling feet allow “fine-tune” adjustment on both sides of the seam
- Eight leveling points provide total control along the entire seam to eliminate the unevenness caused by crowned countertops
- Strong 8” vacuum cups for increased holding power on the heaviest of tops
- Non-spinning, leveling feet with vinyl caps prevent scratching of surfaces
- Entire
seam work area easily accessible during use of product (removal is not
needed in order to apply epoxy or scrape the seam)
- If desired,
units can be converted on the spot to manual seam setters (no
electricity required) via insertion of vacuum cup thumb pump plungers
back into vacuum cups (plungers provided)
- Two tools in one: seam joiner and seam leveler
- Seams easily open and close by use of smooth-turning knurled roller
- Large 8” thumb-pumped vacuum cups with quick vacuum-release buttons
- Four leveling feet that are “non-spinning” and contain replaceable vinyl caps to prevent scratching of surfaces
- High quality, machined aluminum tightening handles
- Protective plastic vacuum cup covers
- Long-lasting anodized billet aluminum and stainless steel components
|
|
 |
 |
 |
 |
|
 |

|